Acard 1-to-7 DVD Super Speed Copy Duplicator (OEM Only)

You are here: Home

Written by Marco Lecointo
Wednesday, 16 May 2007
If it detects only 5 medias, it will copy in 16X speed. It doesn't need connecting to a computer or require much learning. Simply through the LCD and the 4 buttons on the panel you can use the copy controller to back up data, audio or video CD/DVD quickly. ARS-2033P is quite fit for general offices. ARS-2033P Copy Smart Plus has a user-friendly interface. It doesn't need extra training or installation of software. Its 1-to-7 burning is a humanized design. ARS-2033P Copy Smart Plus is exactly a precious product of technology. It can be used as a standalone copy controller. In addition, if you have purchased ACARD AEC-4420P USB link, you can connect it to the computer, to ARS-2033P, and to one of the DVD writers that are connected with ARS-2033P. Thus, ARS-2033P becomes an external writer for the computer. When the hardware is used together with ACARD Ha! CD Burner (+DVD), the combination will be the best solution. Features " Standalone IDE to IDE DVD copy controller " Totally independent without installing hardware or software " Supports a 3.5" hard drive " Supports high-speed 1-to-7 DVD burning " User-friendly interface " Shows messages on LCD " Provides optional functions to extend application Specifications: " ACARD ATP-867 IDE processor " 32-bit RISC CPU " 64MB DDR memory " 8 independent IDE interface channel " 2 X 16 LCD " 4 membrane buttons on the panel " 512KB flash memory for boot loader " 2MB flash memory for copy code " Firmware update by DVD-ROM " Dimension: H 42mm, D 215mm, W 150m System Requirement " Upright external case 9/10 X 5.25" " Power supply of 250W " ATA133 cable (35cm) " Digital DVD-ROM x 1 " Digital DVD writer x 7 " Hard drive (optional) " Tray (optional) " AEC-4420P (optional)
Last Updated ( Thursday, 17 May 2007 )